Last updated:
Foundation Repair Baton Rouge is a foundation repair company with 20 years of industry experience, serving Baton Rouge and the Capital Region, and driveway leveling is one of our most common one-day jobs. The panel next to the garage drops, the one by the street tilts, and suddenly there’s a lip that catches the lawn mower and the kids’ bikes. Instead of breaking it out and pouring new concrete, we lift the panels you already have.
Driveway leveling typically costs $800–$1,800 for a partial driveway (about 200 sq ft) and $1,800–$4,100 for a full one (about 450 sq ft) with mudjacking. Polyurethane foam costs more per square foot but cures faster and weighs less.
Why driveways sink
The soil next to your garage slab was dug out when the foundation was formed and backfilled afterward — often loosely. It keeps settling for years. Add a downspout discharging at the garage corner, or yard runoff crossing the drive, and water washes fines out from under the panel. The panel drops and tilts toward the void.
How we lift it
We drill small holes at planned points across the sunken panels, then pump in a cement-based slurry (mudjacking) or expanding polyurethane foam. The panel rises while we watch a string line, stopping when it’s back in plane with the garage slab and its neighbors. The holes are patched, and the control joints and cracks are sealed with flexible sealant so rain can’t get under and start the process again. With foam you can usually drive on it the same day.
When to replace instead
If a panel is broken into several pieces, badly spalled or heaved by tree roots, lifting won’t give a good result and replacement is the better spend. We’ll tell you which panels are worth lifting. For patios, walks and pool decks, see concrete leveling.
What's included
- Measurement of drop at each panel
- Check of downspouts and runoff onto the drive
- Written price per panel or square foot
- Injection holes drilled at planned points
- Controlled lift back to the garage slab
- Holes patched
- Joints and cracks sealed
- Same-day or next-day use
Sunken driveway options compared
| DIY / patch it | Cheapest crew | Done properly | |
|---|---|---|---|
| Cost | — | Demolition, haul-off and a new pour | $4–$25 per sq ft (lift) |
| Time out of use | — | About a week | Same or next day |
| Matches existing concrete | — | New panel looks different | Same concrete |
| Mess | — | Demolition and haul-off | Small holes, patched |



